In a twinkling of an eye, September, the peak decoration season, is coming. Although the beginning of autumn has passed, the temperature is still hot and hot. This situation is often referred to as the "autumn tiger".
"Autumn tiger" in meteorology refers to the weather above 35 ℃ after short-term heat recovery after three volts. It usually occurs between August and September. The weather is characterized by cool morning and evening and high temperature exposure in the afternoon.
In a twinkling of an eye, September, the peak decoration season, is coming. Although the beginning of autumn has passed, the temperature is still hot and hot. This situation is often referred to as the "autumn tiger".
"Autumn tiger" in meteorology refers to the weather above 35 ℃ after short-term heat recovery after three volts. It usually occurs between August and September. The weather is characterized by cool morning and evening and high temperature exposure in the afternoon.
In the face of excessive temperature difference between morning and evening and high temperature at noon, what should we pay attention to when using tile glue to stick tiles?
1. attention to the construction temperature
The appropriate construction temperature of tile glue is 5 ℃-35 ℃. If the temperature is too high at noon, it is recommended to construct at a slightly lower temperature in the morning and evening.
2. base surface fully wetted
Before the construction of tile glue, be sure to fully wet the base wall. Adequate wetting of the base surface has two benefits:
The 1. is to cool the wall exposed to high temperature;
The 2. is to let the dry base surface absorb part of the moisture, which will not absorb the moisture of the tile glue, so that the tile glue can be fully reacted, and there will be no reduction in the bond strength.
It should be noted that after the base surface is sprinkled, it is necessary to wait for the surface to be dry until there is no bright water before paving can be carried out.
3. deployment of appropriate amount of tile adhesive
The construction of tile glue should pay attention to the on-site construction environment. The operable time of tile glue under standard environment is about 2 hours. However, in the high temperature environment, the moisture in the glue evaporates quickly, and the solidification time will be shortened. Therefore, it is best to use the tile glue immediately. In addition, the scraping area should not be too large, so as not to have time to lay tiles, tile glue will appear dry knot.
Do not add water to 4. the tile adhesive after drying.
Some masters for convenience, one-time deployment of tile glue too much, and the construction time can not be controlled. In hot weather, water evaporates quickly. When the tile glue begins to solidify, water is added to the blended tile glue again for the convenience of construction. If the tile adhesive that has already started to react is added with water again, the bonding strength of the tile adhesive may be insufficient, resulting in the tile falling off.
5. do a good job in tile adhesive storage
"Autumn tiger" weather, often high temperature accompanied by rain. Tile glue must be stored well. The tile glue must be stored in a cool and dry environment. It must not be exposed to the sun or drenched in water for a long time to avoid problems such as caking and bag bursting of tile glue and damage to the performance of tile glue products.
If you encounter any problems in the process of purchasing or using ceramic tile glue, you can consult our professional construction master at your nearest physical store, and they will give you professional answers!
