How to do the beautiful sewing of ceramic tiles? Sticking it firmly to explain the tips of beautiful sewing to you.
Nov 22,2023
When decorating, there is often this question: Do you want to make beautiful seams on ceramic tiles? Is it okay if it is not beautiful? It is estimated that many people are still confused. Today, let's stick it firmly and talk about beautiful sewing.
As a kind of building material, ceramic tile will produce thermal expansion and contraction phenomenon due to the change of temperature and humidity in the physical environment. In addition, the cement mortar laying ceramic tile will also produce force after drying. If there is no brick seam, when the ceramic tile or bonding material thermal expansion and contraction, between adjacent tiles due to extrusion and hollowing, deformation, cracking and even fall off and other problems.
Paving ceramic tiles has high technical requirements for workers, and the process of manual tiling cannot be completely accurate. Proper seam can make the joints appear straighter and ensure the overall effect.
Leaving joints can avoid uneven paving due to uneven moisture of mud and uneven tension caused by high condensation of mud after completion. And in the late maintenance of ceramic tiles, a single piece of damage to replace this one on the line.
The US sewing agent is composed of high-tech new polymers and high-grade pigments, which has good waterproof, moisture-proof, anti-penetration and anti-mildew properties. After solidification, the surface is smooth and free from oil stains, which can effectively prevent the tiles from turning black and yellow and reduce the growth of bacteria and mold. At the same time, the United States sewing agent rich color, can show matte, light, metal and other effects.
Beautiful joint construction skills
Use a small awl or a small shovel to scrape the dirt in the gap between the tiles, and then use a brush to clean it, leaving a gap depth of 1.5mm.
The masking paper is pasted horizontally and vertically along the edge of the ceramic tile. When pasting, the masking paper should overlap with the edge line of the ceramic tile as much as possible, but it should not be pasted on the seam beyond the edge of the ceramic tile, so there will be holes when tearing the masking paper.
When installing the glue gun, clamp the groove at the front of the hose to the glue gun; push the glue gun to ensure that the AB component is discharging at the same time; install the mixing pipe and push the glue gun to ensure that the front section is discharging 20cm.
Squeeze the sewing agent directly along the gap, with the emphasis on uniform force. After filling the gap, use a scraper or ice cream stick to smooth it while the sewing agent can still flow.
Use a pressure piece or a pressure bar to pull evenly from one end to the other end along the gap of the tile, and do not deviate from the masking paper to prevent contamination of the tile surface. Note: The cross gap cannot be pressed repeatedly, and the gap should be pressed from the middle to the surrounding.
After the sewing agent is solidified, the residual sewing agent around the gap can be removed directly with a scraper.
Note: The masking paper should be uncovered to the outside.
24 hours after caulking to avoid pollution, water, avoid walking on the ground. At room temperature, 24 hours to reach the use of strength, natural conservation for 3 days.
Paste steady has a perfect solution for decoration accessories, and has developed TDW-218 beautiful sewing treasure and TDW-219 porcelain sewing king products with great concentration. with flexibility as its core characteristic, heat resistance and frost resistance, long service life, no cracking and no falling off, it provides a high-quality solution for ceramic tile beautiful sewing.
Quick Quote
Skip the queue! Get tailored solutions within 24hrs📆
Share to
