Guangdong HeRuiZhi Manufacturing New Materials Co., Ltd

The correct winding method of waterproof tape is to teach you how to do waterproof in your house.

Nov 22,2023

Leakage in the home, paint is the first thing that many people think of, but in fact, the use of tape is also completely feasible, so the correct way to wrap waterproof tape is how to do it!

Waterproof tape correct winding method

With waterproof tape, wrap the thread of the faucet in a clockwise direction for several turns. The direction of the waterproof tape must be clockwise, which means that the direction of wrapping the waterproof tape should be opposite to the direction of the thread of the faucet.

01The construction method of waterproof tape is based on the gap and joint width of the surface joint, and the specifications and dimensions are selected according to the engineering design requirements. Wipe the surface joints and cracks clean. Starting from the end of the surface crack, tear off the isolation paper on the asphalt tape and slowly open it in a straight line along the joint to connect the asphalt tape to the roof.

02How to Use Waterproof Insulating Tape How to Use Waterproof Insulating Tape First, unpack, uncover and remove the isolation layer (a layer of film) of the waterproof tape, lap the waterproof tape 2CM away from the exposed conductor, lengthen 200, use half lap winding (half pressure), wind to 2CM outside the exposed conductor, generally wind 2~3 layers.

HOW TO DO HOUSE WATERPROOF

0 1

The ground wall surface cleaning first use shovel knife, broom and tools to remove the protrusions, mortar and pimples on the surface of the base layer and clean up the dust and sundries. The yin and yang corners, pipe roots, floor drains and other parts should be carefully cleaned to ensure good waterproof effect in the later period.

0 2

The rolling brush moistens the ground on the painting surface with the rolling brush. The painting surface is completely wet without accumulated water, and cannot be moistened by sprinkling water.

0 3

Brush the waterproof layer and the waterproof layer for three times, evenly, without transparent bottom.

The first time: use the plugging king to fill the wall at the yin corner and around the sewer pipe.

The second time: horizontal painting waterproof once, no bottom, no blistering, in line with the requirements of painting size, water and electricity slotting tank body all painted waterproof.

The third time: after drying, brush again in the vertical direction.

Product recommendation

Paste a steady base on market demand, developed a TDW-221 butyl waterproof tape. The product is butyl rubber thickened rubber layer, strong adhesion, environmental protection, no tar asphalt, no glue overflow under high temperature, no dry cracking, no deformation, no shedding. It has the characteristics of aging resistance, high and low temperature resistance, and simple operation. It is a good helper for waterproof emergency treatment!