How to pave the infinite even-grain rock board? I'll give you a move if you stick it firmly.
Nov 22,2023
In the past two years, the rock plate production line in the ceramic industry has shown explosive growth. With its high hardness, high temperature resistance, acid and alkali resistance, strong processability and other superior properties, rock plate is favored by the pan-household industry, especially the infinite continuous pattern rock plate is widely used in scenes such as background walls, countertops, cabinet door panels, etc. In the cross-border applause, the adaptation of the rock plate into the home improvement market is not satisfactory.
Because the paving of rock slabs has become a difficult problem for rock slabs to enter the terminal, the traditional paving method has high cost, long construction period, and is also prone to potential safety hazards, which makes many dealers flinch from rock slabs and makes it difficult to show the charm of infinite continuous rock slabs at the terminal. So how should the infinite even grain rock board be paved? Let's stick it firmly for everyone to popularize science!
01
Before starting paving, check the model and color number of bricks to ensure consistency, and confirm that the brick surface is flat, undamaged and clean. The paving of even-textured bricks shall be tried out according to the brick texture sequence. When paving, it shall be paved in the same direction as the arrow on the back, so as to realize natural and arbitrary even-textured bricks.
02
Brush back glue on the back of the upper wall brick. It is recommended to use a toothed scraper to evenly apply the tile glue on the back of the brick to ensure 100% fit between the tile base surface and the wall surface. 03
Leave the seam, tile paving process must have enough gaps, the wall floor to leave 1.5~2mm seam, so that it has a certain shrinkage space.
04
After paving, clean the brick surface and protect the ground to prevent unnecessary bumps and scratches, as well as damage caused by subsequent decoration.
05
In the later period, the use of the same color as the surface of the ceramic tile (filling) joint agent can ensure the continuity of the whole surface.
Product recommend
Based on practical application, we have developed a series of products for rock plate and large plate paving, providing a comprehensive solution. TDW-Ⅲ type rock plate large plate tile glue, designed for rock plate large plate paving and paste, is your safe and worry-free choice.
TDW-Ⅲ type rock plate tile adhesive is a kind of polymer modified cement-based tile adhesive, which has large bonding force and more flexibility, and can resist the stress caused by thermal expansion and contraction of the bonding layer. It is suitable for pasting rock plate tiles on gypsum board, fiberboard, plywood or old veneer (ceramic tile, mosaic, terrazzo) and other large-sized stone plates, it has the characteristics of good flexibility, strong bonding force, super anti-slip, dust-free and haze-free, and super-long drying.
Scope of application:
Can be directly applied to concrete, cement plaster, concrete slab, plastering brick surface and some waterproof coating;
It is suitable for pasting rock slabs, large slabs, marble, natural stones, mosaics, thin plates, and other tiles with water absorption of less than 0.5% on indoor and outdoor walls.
Quick Quote
Skip the queue! Get tailored solutions within 24hrs📆
Share to
