TDW-666 Nano Penetrating Waterproof Agent
Tag list： TDW-666 Nano Penetrating Waterproof Agent
Category:
Product Description
TDW-666 Nano Penetrating Waterproof Agent is composed of inorganic silicate.
Enhances the density and impermeability grade of concrete, applicable to both the
water-facing and water-receiving surfaces.
Waterproof, anti-seepage, and moisture-resistant, effectively removes wall alkali
whitening and effortlessly solves the problem of slow seepage caused by wall sweating.
Scope of Application
It is suitable for waterproofing and anti-seepage of cement concrete or mortar on both the water-facing and water-receiving surfaces.
Technical Specifications
The product complies with the standard requirements of JC/T 1018-2006 "Water-based Penetrating Inorganic Waterproofing Agent" (Type I), with the following key specifications:
| order number | surveillance project | Base Standard Index (Medium Brightness) | |
| 1 | surface | transparency liquid | |
| 2 | Density/(g/cm³) | ≥1.10 | |
| 3 | pH price | 11±1 | |
| 4 | dynamic viscosity /s | 11.0±1.0 | |
| 5 | Surface tension/(mN/m) | ≤26.0 | |
| 6 | Gelation time/min | ≤200 | |
| 7 | Storage stability, 10 cycles | No changes in appearance | |
| 8 | Permeability resistance (concrete penetration height ratio) /% | ≤60 | |
| 9 | Carbonization resistance value/% | 7d | ≥30 |
| 28d | ≥20 | ||
| 10 | hydrophilicity of concrete surface | cannot roll in a beaded manner | |
Construction Operations
- Confirm operation range: Ensure safety and verify the operation area. Note: Do not operate when temperatures are below 5°C or above 40°C.
- Waterproofing base repair: For cracks wider than 0.3mm, fill them with waterproof mortar.
- Note: Use cement-based repair materials;
- Base surface rinsing and wetting: Use high-pressure water gun to rinse the base surface;
- Remove the floating slurry and oil stains on the surface, and moisten the base surface;
- The base plane is in a state of saturated surface dryness;
- First coat application: When the substrate surface is dry, apply the first coat at a rate of 150ml/m².
- Watering: After the material has been absorbed (approximately 20–30 minutes), water should be applied to promote its penetration.
- Apply the second coating after water absorption (approximately 20-30 minutes), using 100ml/m².
- Water spray and surface cleaning: After the material has been fully absorbed and the surface is dry (about 30-40 minutes), spray water to clean the surface.
- Moisture maintenance: If the concrete interior is relatively dry, it should be watered and maintained for at least 3 days.
Reference dosage
The theoretical dosage of TDW-666 nano-penetration waterproofing agent is about 250ml/㎡.
Important Notes
Matters need attention
- This product is suitable for use in environments ranging from 5°C to 40°C, and should be avoided in high temperatures, low temperatures, or during rainy outdoor conditions.
- Please read the construction instructions carefully before use to achieve optimal results.
- Do not drink.
- Keep out of reach of children and pets. In case of accidental contact, rinse immediately with large amounts of water.
- Storage and shelf life: Store at room temperature for 18 months if unopened.
- Production date: See outer packaging.
Previous Page
Corporate Strengths Overview
Intelligent Manufacturing & Full Automation
A ¥30M+ smart factory integrates advanced automation and IoT-enabled traceability systems, aligning with China's "Manufacturing 2025" strategy.
Scalable Production & National Network
43 partner factories nationwide deliver 960K tons/year (solid) and 480K tons/year (liquid) capacity, ensuring rapid market responsiveness.
Core Data-Driven Systems
Four intelligent platforms (central monitoring, equipment management, dynamic KPIs, energy optimization) enable real-time production control and efficiency.
Quality & Capacity Synergy
Fully automated processes ensure product uniformity, while scalable output meets global demands, positioning TDW as a leader in smart manufacturing.
Related Product
TDW-II Super Strong Tile Adhesive
TDW-III Tile Adhesive For Big Slab
TDW-180 Specific Adhesive For Flexible Stone
Related Product
Quick Quote
Skip the queue! Get tailored solutions within 24hrs📆
Share to
