TDW-507 Polymer Crack-Resistant Waterproof Mortar
Tag list： TDW-507 Polymer Crack-Resistant Waterproof Mortar
Category:
Product Description
TDW-507 polymer crack-resistant and waterproof mortar is a dry powder product scientifically formulated from inorganic cementitious materials, refined sand, mineral admixtures, high molecular polymers, and other additives. Simply add water and stir on-site before use. It features stable volume, low shrinkage, and prevents cracking and hollowing. It is also non-toxic, harmless, and environmentally friendly.
Scope of Application
Waterproofing and seepage prevention projects for building exterior walls
- Waterproofing and damp-proofing of interior walls, kitchen and bathroom walls
- Waterproofing projects for underground structures (such as pile heads, garages, tunnels, etc.)
Technical Specifications
Product performance conforms to JC/T 984-2011 Technical Specifications for Polymer Cement Waterproof Mortar The specific technical specifications are as follows:
| project | Technical indicators | ||
| Condensation time | Initial setting/min ≥ | 45 | |
| Final coagulation/h, ≤ | twenty four | ||
Anti-seepage pressure/MPa | Coated specimens, ≥ | 7d | 0.5 |
| Mortar specimens, ≥ | 7d | 1.0 | |
| 28d | 1.5 | ||
| Compressive strength/MPa ≥ | 24.0 | ||
| Flexural strength/MPa ≥ | 8.0 | ||
| Flexibility (lateral deformation capacity) / mm ≥ | 1.0 | ||
| Bond strength/MPa, ≥ | 7d | 1.0 | |
| 28d | 1.2 | ||
| Alkali resistance | No cracks or peeling | ||
| Heat resistance | No cracks or peeling | ||
| frost resistance | No cracks or peeling | ||
| Shrinkage rate/% ≤ | 0.15 | ||
| Water absorption rate (%) ≤ | 4.0 | ||
Technical parameters
| Product Technical Parameters | Packaging specifications | 20kg / bag |
| Properties | gray powder | |
| Shelf life | Store unopened packaging in a cool, dry place. ,Save The shelf life is 12 months. Months | |
| Implementation Standards | JC/T984-2011 Polymer Cement Waterproof Mortar | |
| Construction technical parameters | Operable time | 1h |
| Construction Environment | Operating temperature: 5-35℃, rainy days and 5 Construction is prohibited during winds of level 4 or above. | |
| Construction usage | 1.3kg/m² / mm -1.7kg/m² / mm |
Construction Operations
The surface layer should be thoroughly cleaned of dust and oil stains. Any protruding or loose areas should be removed, and any damaged parts should be filled with mortar, ensuring no cracking or hollow areas occur. At the same time... Thoroughly wet the base layer with clean water. However, there should be no open water.
Preparing adhesive paste
The amount of water to add is indicated on the packaging certificate. First, add the water to the mixing bowl, then add the powder, and mechanically mix quickly and evenly. The prepared adhesive must be Use within 1 hour; do not add water during use.
Apply adhesive
a. Single application thickness 2mm ~ 5 mm
b. The mortar after mixing According to the specific construction thickness design requirements Apply the plaster in multiple coats.The second layer of waterproof mortar is applied after the first layer has hardened. And so on;
c. After the final application of adhesive is completed After it hardens, water it to maintain its condition. Maintenance time should be no less than 7 days. sky;
d. The final total thickness of the mortar layer shall not be less than the design thickness.
Important Notes
Precautions
- The mixed slurry should be used within 1 hour ;
- Never mix water with mortar that has already partially set and dried, and then reuse it .
- Construction temperature 5-35℃ Construction is prohibited during periods of high temperature, frost, or winds exceeding level 5 .
- Mixing utensils must be cleaned before and after use.
- Waterproof mortar construction Construction and use should be avoided in conditions such as direct sunlight. This is to prevent the waterproof mortar from losing water too quickly and affecting its strength .
Transportation and storage
- Avoid rain and impacts during transportation.To avoid damaging the packaging ;
- It needs to be stored in a cool, dry warehouse. To prevent moisture Direct sunlight and contact with water are strictly prohibited .
- Under normal transportation and storage conditions The product has a shelf life of 12 months .
Safety regulations
- This product contains cement and may irritate the eyes and skin. Therefore, please wear appropriate protective equipment during application. If the product accidentally gets into your eyes, rinse immediately with water and seek medical attention promptly.
- Friendly reminder: The included palletizing wrap and wooden paddle at the bottom will better protect the product from water, dust, and moisture, and safeguard the packaging. Therefore, please do not damage them before opening and use! (Stretch wrap and pallets are not included for small quantities)
Previous Page
Corporate Strengths Overview
Intelligent Manufacturing & Full Automation
A ¥30M+ smart factory integrates advanced automation and IoT-enabled traceability systems, aligning with China's "Manufacturing 2025" strategy.
Scalable Production & National Network
43 partner factories nationwide deliver 960K tons/year (solid) and 480K tons/year (liquid) capacity, ensuring rapid market responsiveness.
Core Data-Driven Systems
Four intelligent platforms (central monitoring, equipment management, dynamic KPIs, energy optimization) enable real-time production control and efficiency.
Quality & Capacity Synergy
Fully automated processes ensure product uniformity, while scalable output meets global demands, positioning TDW as a leader in smart manufacturing.
Related Product
TDW-I High-energy tile adhesive
TDW-100 Reinforced Waterproof Coating
TDW-888 Rubber Waterproof Paste
Related Product
Quick Quote
Skip the queue! Get tailored solutions within 24hrs📆
Share to
